To Next PageTo Next Page
Need help?Do you have a question about the Liebert UHA1R-0100L and is the answer not in the manual?
General| Product Type | UPS |
|---|---|
| Input Voltage | 200-240 VAC |
| Output Voltage | 200-240 VAC |
| Phase | Single-Phase |
| Frequency | 50/60 Hz |
| Runtime at Full Load | 5 minutes |
| Transfer Time | 0 ms |
| Efficiency | Up to 95% |
| Power Capacity | 10 kVA |
| Battery Type | Valve-regulated lead-acid (VRLA) |
| Weight | 80 kg |
Lists the key features and capabilities of the Liebert ITA 10KVA UPS system.
Explains the internal workings and power flow within the UPS.
Outlines the various operational states and modes of the UPS.
Lists the detailed technical specifications for both UPS models.
Details the necessary external protective devices for UPS input and output.
Guides on connecting input, output, and battery power cables correctly.
Outlines the procedures for commissioning a single UPS after installation.
Instructions for connecting I/O and signal cables in parallel systems.
Explains how to configure parallel addresses for multiple UPS units.
Procedures for commissioning the entire parallel UPS system.
Step-by-step guide for powering on the UPS and its self-test.
Instructions for turning on the UPS and its inverter.
Procedures for safely turning off the UPS in various modes.
A guide to diagnosing and resolving common UPS faults and errors.
