Lifetime 1270 - Step 1.3: Attach Height Adjustment Knob


TOOLS AND HARDWARE REQUIRED FOR THIS PAGE
Insert a 5/16” Hex Nut (AYT) into the 5/16” Hex Knob (AYU) as shown. It may be
necessary to use the vXv#ARRIAGE"OLT!/,to place the Nut in the
Knob. Then position the Top Pole (ALH) at its lowest height and attach the
Knob to the Top Pole and -IDDLE0OLE!,& with the hardware shown.
SEC
1.3
AYT (x1)
AOL (x1)
./4//,32%15)2%$&/24()30!'%
ALH
!,&
AYU
AYU
AYT
AOL