Lifetime 60057 - SITE PREPARATION - CONCRETE PLATFORM PREPARATION

16
TOOLS AND HARDWARE REQUIRED FOR THIS PAGE
SEC
Concrete (1 cu. yd.)
SEC
SITE PREPARATION - CONCRETE PLATFORM PREPARATION
The actual dimensions of your shed (at its widest and deepest points) are 7’ x 4’ 8”. Ensure you select a site that
will accommodate these measurements. The base of the shed is slightly smaller than this, so you will need to
CREATEALEVELSURFACETHATISATLEASTv7IDEXv$EEP7ERECOMMENDUSINGALEVELCEMENTORPATIO
style surface. This will provide the best long-term performance for your shed.
Front
Note: Surface must be leveled before installation. If the surface is not properly leveled, the shed will not assemble
or function correctly. Proper surface leveling will save you time in the long run, so please do not ignore this step.
!
Note: Any platform or similar structure should be built above ground in order to avoid water pooling inside the shed.
!
4’ 8”
4’ 8”
7’
7’
81 1/2”
55 1/4”
1.1
1