Lifetime 60057 - Page 18

18
TOOLS AND HARDWARE REQUIRED FOR THIS PAGE
SEC
48”
55 1/4”
8d 1 1/2” Common NailX
48” x 55 1/4” x 3/4”
Treated Plywood (x1)
33 1/2” x 55 1/4” x 3/4”
Treated Plywood (x1)
SEC
1.3
SEC
1.4
ALTERNATIVE SITE PREPARATION: OPTION 1 - WOOD PLATFORM ASSEMBLY (CONT.)
A
B
Square up the frame by measuring from corner to corner. Measurement A should equal Measurement B.
Cut Plywood into sizes called for above. Arrange the Plywood according to the diagram and nail into place with
DXvNAILS0LACEPLATFORMINTHEDESIREDLOCATION)FPLATFORMDOESNOTRESTLEVELONTHEGROUNDBUILDUP
LOWPOINTSWITHLOOSEDIRTUNTILPLATFORMISSTABLE$RILLTHREEEVENLYSPACEDvDRAINHOLESINPLYWOODBETWEEN
EACHvXv
Note: All lumber must be rated for outdoor use.
!
1
Front End
Front End
33 1/2”