Lifetime 60057 - Page 21

21
TOOLS AND HARDWARE REQUIRED FOR THIS PAGE
SEC
AGR
SEC
SEC
FLOOR ASSEMBLY
Lay an Outer Floor Panel (AGR) fl at on the ground. Hold the second Outer Floor Panel (AGR) at an angle as shown and
fi t the tabs on one Panel into the slots of the other. Lay the Outer Floor Panel fl at.
Decide which end will be the front of your shed. Lift the front Outer Floor Panel up enough to slide two Door Hinge
Bushings (AHO) under and up through the holes in the front Outer Floor Panel as shown.
CAUTION
Sharp objects may damage your fl oor. If resting
sharp, heavy objects on your shed fl oor, place a
block of wood between the sharp object and fl oor.
AGR
AHO
AHOX
2.1
2.2
2