Lifetime 90192 - Page 27

27
TOOLS AND HARDWARE REQUIRED FOR THIS PAGE
Slide the v5"OLT!/5through the ,EFTAND2IGHT"ACKBOARD"RACKETS!**
!*+4HE5"OLTMUSTRESTINTHENOTCHESOFTHE"ACKBOARD"RACKETS
as shown.
Connect the Backboard Brackets together using two vXv
Hex Bolts (AAS), two vXv'ALVANIZED3PACERS!"3, and two v
#ENTERLOCK.UTS!!".
SEC
3.1
SEC
3.2
(Not to scale)
AOU (x1)
AAS (x2)
ABS (x2)
AAB (x2)
7/16” (x2)
AAB
ABS
AAB
AAS
AAS
Note: Tighten the hardware securely now.
!
AOU
!**
!*+
Notch
AOU
!**
!*+