Step 5 as Above photos show
A, Firstly , Dismantle these two Mini green PCB’s screws , each PCB
board , 2pcs screws.
B, Secondly , Dismantle those 4 pcs M3 screws.
C, Dismantle those 4 pcs M 4 screws
D, take out of the CMY filter module.
.
Step6, As the Above photos show,
A, Dismantle those 2 pcs M3 screws on the green Mini PCB board
B, Dismantle those 4 pcs screws of the Module.
38
To Next Page
Loading...
