Lighthouse Remote 3014PN - Page 79

00
248083317-1 Rev 4 I-1
Index
Numerics
5-port hub 4-12
A
Accessories 2-2
Administrator rights 4-12
ARP 4-1
ARP Cache 4-1
arp -d * 4-15
arp –d * 4-19
arp –s 4-15
AUTOMATIC Counting Mode 5-2
Automatic Mode 5-2
C
Cabling Sensor 3-12
Calibration 2-3, 2-4, 2-5, 2-6
Caution
LWS Network Adapter 4-2
Channel Threshold 2-3, 2-4, 2-5, 2-6
Clear LAT 4-19
Clear the Data Buffer 5-2
Clearing the ARP Cache 4-19
CMD 4-14
Collection Optics 2-2
Command Console 4-14
Command Register B-5
Communicating with the Instrument 4-2
Communication Modes 2-3, 2-4, 2-5, 2-6, 4-2
Communication Ports 3-11
Communications 4-1
Communications Settings B-1
Connecting to a PC 4-5
Connection to host lost 4-18
Connections 3-10
Counting Efficiency 2-3, 2-4, 2-5, 2-6
Cross-over Cat5 4-12
Cross-over Cat5 Setup 4-14
D
Data Enable Registers B-9
Data loss 4-5
Data Port pinouts 4-3
Data Registers B-6
Device Status Word B-8
Data Storage
REMOTE 3014PN 2-3
REMOTE 3104PN 2-4
REMOTE 5014PN 2-5
REMOTE 5104PN 2-6
Data Type Registers B-9
Data Units Registers B-10
Default Communication Mode 4-2, 4-4
Default Instrument Parameters
Changing 5-5
Definitions 4-1
Description, general 2-1
Device Status B-4
Device Status Word B-8
DHCP 4-1
Dimensions 2-3, 2-4, 2-5, 2-6
E
Ethernet Cable
Plenum Cable 3-3
RJ45 connector 3-3
Shielded Twisted Pair (STP) 3-2
Unshielded Twisted Pair (UTP) 3-2
Ethernet Configuration 4-6, 4-12
Ethernet network 4-2