Lighthouse solair 5100 - User Manual

Details classifications of warnings and general safety advice.

Outlines safety precautions related to the laser-based sensor.

Warns about connecting multiple ports and potential damage.

Advises on protecting against electrostatic discharge (ESD) for component safety.

Lists detailed technical specifications of the SOLAIR particle counters.

Explains connecting and configuring 4-20mA analog sensors.

Details Ethernet setup using adapter, network preparation, and cable configurations.

Explains how to program the interface using Windows Telnet.

Guides on connecting the instrument to an Ethernet LAN and verifying connectivity.

Provides step-by-step instructions for initial instrument setup and startup.

Describes the MAIN screen providing a status snapshot of the instrument.

Details Data Setup, Device Setup, Particle Channels, and Analog Channels.

Details SECURITY, POWER ON PASSWORD, and CONFIGURATION PASSWORD.

Details configuring the instrument using the MODBUS protocol.

Discusses manual/automatic modes and applicable action commands.

Outlines when maintenance is needed and recommends annual calibration.

Describes zero count testing and procedures for troubleshooting.

Provides maps for sensor settings, data, alarms, and device options.