Lightmed TruScan 532 - Page 23

TruScan 532 Single - Wavelength – Operators Manual Rev. No 02 Page 22 of 114
Exposure
Duration
0.01, 0.02, 0.03, 0.04, 0.05, 0.06, 0.08, 0.1, 0.15 then from 0.2 to 3.0 sec.
in 0.1 sec. intervals
Repeat
Interval
Selectable from 0.01 to 3.0 sec. and equal to or greater than exposure
duration in same discrete steps as duration.
SP Mode
Duty cycle selections - 7.5%, 150µs ‘On’ time
- 10%, 200µs ‘On’ time
- 12.5%, 250µs ‘On’ time
- 15%, 300µs ‘On’ time
- 20%, 400µs ‘On’ time
- 30%, 600µs ‘On’ time
Doctor
Safety Filter
OD4
Safety Class
Class 4
Power
Display
accuracy
Better than +/-20% of actual
Beam
Divergence
< 0.2 NA
Aiming Laser
Laser Type
Red Laser Diode
Wavelength
635nm (Red)
Mode of
Operation
CW
Output power
Maximum of 1.0mW
Power
Adjustment
Continuously variable
Safety Class
Class 2
Laser Delivery Units
Integrated Slitlamp LDU
Slitlamp model
CSO Model SL980 (K992836)
Spot Sizes
50m ~1000 m continuously selectable on Zoom assembly of
Delivery unit
Focus plane
All spot sizes Parfocal to Slitlamp focus plane
Fiber Length
2 m
Mounting
Direct to Slitlamp housing