Need help?Do you have a question about the Lightmed TruScan 532 and is the answer not in the manual?
Lists critical warnings and precautions for system operation.
Discusses guidance for safe laser use and optical hazards.
Provides guidelines to prevent exposure to laser beams.
Outlines electrical safety standards and precautions.
Explains the safety controls and features of the system.
Locates controls on console front and rear panels.
Displays system software screens and pop-up windows.
Procedures for final verification and checkout of the system.
Outlines procedures for system initialization and validation.
Explains error codes and their corrective actions.
General| Delivery System | Slit lamp adapter |
|---|---|
| Indications | Retinal photocoagulation |
| Cooling System | Air cooled |
| Display | Touch screen |
| Power Requirements | 100-240 VAC, 50/60 Hz |
| Type | Photocoagulator |
| Wavelength | 532 nm |
| Power Output | 2.5 W |
| Repetition Rate | Single |
| Spot Size | 50 - 1000 μm |
| Aiming Beam | 635 nm red diode |
| Electrical | 100-240 V, 50/60 Hz |
To Next Page
