Lightmed TruScan 532 - Page 6

TruScan 532 Single - Wavelength – Operators Manual Rev. No 02 Page 5 of 114
LIST OF DRAWINGS / FIGURES
Figure
Description
Page
2.1
Safety Controls and Features
13
2.2
Laser Console Safety and Controls Labels
16
2.3
Laser Console Safety Labels
17
2.4(a)
Integrated Slit lamp LDU with Labels (RH side)
18
2.4(b)
Integrated Slit lamp LDU with Labels (LH side)
19
2.5
LIO LDU with Labels
20
4.1
System software start up screen shot
29
4.2
System software boot up ok and system is "Standby" mode
29
4.3
System software is ready to shutdown
32
4.4
Laser Console Connection / Controls
33
4.5
Screen shot display
36
4.6
Console Control Screen
37
4.7
Pattern Scan Control Screen Shot
41
4.8
Remote Control Panel Breakdown
50
4.9
Integrated Slit lamp LDU Controls
54
4.10(a)
Front View of LIO LDU Controls
56
4.10(b)
Top View of LIO LDU Controls
56
4.11
SL980 Slit lamp Parts List and Controls
58/59
5.1
Packing Carton for integrated LDU and slit lamp
62
5.2
Portable Carry Cases for Console
62
5.3
Inter-power connection(Right hand side)
66
5.4
Stands with power plugs facing each other
66
5.5(a)
Rear view box connection
67
5.5(b)
Removal fuse socket
67
5.5(c)
Removal fuses
68
5.5(d)
Voltage Setting Verification and Reinsert Back Process
68
5.6
Final assembled product and verification recheck
69
5.7
Slit lamp Packaging Ass’y
71
5.8
Housing Screw Location
72
5.9
Assembled Upper and Lower Housing and organized Cabling
72
5.10
Cabling Stuffed Underneath of Table Top Cabling Gutter
73
5.11(a)
Slit Lamp Arm Ready for Delivery Housing
73
5.11(b)
Delivery Housing Fitting Process
74
5.12
Delivery Fiber Holder Process
74