LightSpeed Technologies 705iR - Page 26

26
2. Setup & Use
3. Optional
Accessories
4. Troubleshooting
5. Warranty, Safety
& Specifications
1. Overview
INITIAL SET-UP:
OPTIONAL IR MEDIA CONNECTOR
1. Turn off the second microphone.
The iR Media Connector uses
the same channel (channel B) as
the optional second microphone
(REDMIKE, LT71, or REDMIKE
Share). As a result, they cannot be
used simultaneously. If you have
a second microphone, turn it off
before transmitting audio from the
iRMC.
NOTE: If you adjust the CH B
volume on the 705iR, you will also
be changing the volume for your
second microphone. Return the
CH B volume knob to the original
position before turning the second
microphone back on.
2. The iR Media Connector volume
is preset for most standard audio
signals. If you need to turn the
volume up or down, follow this
procedure:
A. Adjust the volume at the
computer, television, or other
audio source if possible.
B. If the audio source does not
have a volume control (such
as many DVD players) adjust
the volume at the iRMC.
C. If the first two options do not
give optimum volume level,
the last place to adjust the
volume is the CH. B Volume
on the 705iR.
705iR
CHA
CHB
TREBLE
BASS
AUX
AUX
POWER
IN
OUT