Lightspeed flexcat - Connect the Base Station

17
1. Overview 2. Initial Set-up 3. DaiIy Operation
4. Additional
Information
5. Maintenance &
Troubleshooting
6. Safety &
Specifications
2. CONNECT THE BASE STATION
1. Locate the power supply and
AC power cord. Connect the AC
power cord into the DC power
supply.
2. Plug the AC power cord into an
electrical outlet.
3. Insert the DC connector into the
“DC POWER INPUT” jack on the
base station.
4. Switch the power to the ON
position.
POWER
REGISTER
SPEAKERS
LINK
ON
4