25
1. Overview 2. Initial Set-up 3. DaiIy Operation
4. Additional
Information
5. Maintenance &
Troubleshooting
6. Safety &
Specifications
2. MULTIMEDIA AUDIO INTEGRATION
1. Connect an audio cable from
your computer (or other
device) into one of the audio
inputs connections on the base
station.
2. Select “ALL” or “SPEAKER #
1-6” on the teacher remote.
3. Play the audio file on the
computer, adjusting the
volume on the computer as
needed.
4. Directing audio to the
Students:
UÊ Use the remote to direct that
audio to all students or a
selected group (1-6)
UÊ NOTE: the teacher’s voice will
also be broadcast to whichever
group the multimedia is sent to.
Press MUTE on the remote if you
only wish the children to hear
the audio file.
To Next Page
Loading...
