34
1. Overview 2. Initial Set-up 3. DaiIy Operation
4. Additional
Information
5. Maintenance &
Troubleshooting
6. Safety &
Specifications
REMOTE REGISTRATION
1. Make sure that the Remote is
adequately charged enough to
be operating.
2. Remove the battery cover.
3. Be sure that the Teacher Select
switch is in the proper position.
4. Turn on Base Station if it is not
already on.
5. Press the Remote Pairing button
on the Base Station and be sure
that the yellow pairing LED is
lighted.
6. Press the Remote Pairing button
on the Remote and be sure that
the green pairing LED is lighted.
INSIDE BELTPACK
PAIRING
BATTERY
TOGGLE
SWITCH
2
6
To Next Page
Loading...
