35
1. Overview 2. Initial Set-up 3. DaiIy Operation
4. Additional
Information
5. Maintenance &
Troubleshooting
6. Safety &
Specifications
REMOTE REGISTRATION CONT’D
7. Wait for both the yellow and
green pairing LEDs to turn off
simultaneously, typically after
about 5 seconds.
8. If the pairing LEDs turn off after
30 seconds then the Remote did
not pair to the Base Station.
9. Press the ALL button on
the remote – the button will
light indicating the remote is
registered.
10. If the pairing fails, repeat steps 5
through 7.
11. Rreplace the battery cover when
completed.
POWER
REGISTER
SPEAKERS
LINK
REMOTES
REGISTER
MULTIPACKS
REGISTER LINK
To Next Page
Loading...
