Lightspeed flexcat - Group Speaker Registration Process

30
1. Overview 2. Initial Set-up 3. DaiIy Operation
4. Additional
Information
5. Maintenance &
Troubleshooting
6. Safety &
Specifications
GROUP SPEAKER REGISTRATION PROCESS
1. Turn on the new group speaker.
2. Press the Group Speaker
Registration button on the Base
Station. The yellow LED on the
Base Station will start flashing.
VOL
ON
REG
LINK
REGISTER
STATION
#
OFF
POWER
VOL
ON
REG
LINK
REGISTER
OFF
POWER
POWER
REGISTER
SPEAKERS
LINK
REMOTES
REGISTER
MULTIPACKS
REGISTER LINK
REGISTER
SPEAK
LIN