33
1. Overview 2. Initial Set-up 3. DaiIy Operation
4. Additional
Information
5. Maintenance &
Troubleshooting
6. Safety &
Specifications
BELT-PACK REGISTRATION
1. Turn on the new Belt-Pack.
2. Press the Belt-Pack registration
button on the Base Station. The
yellow Belt-Pack registration LED
on the Base Station should start
flashing.
3. Press the Belt-Pack registration
button on the new Belt-Pack.
Both of the blue Belt-Pack
registration LEDs on the new
Belt-Pack should start flashing
alternately.
4. Wait for the yellow Belt-Pack
registration LED on the Base
Station to change to a steady
yellow.
5. Wait for the blue Belt-Pack
registration LEDs on the new
Belt-Pack to settle on a single
steady blue LED.
6. The registration has failed if any
of the registration LEDs start to
flash rapidly.
7. If the registration fails repeat the
steps 2 through 5.
1
POWER
REGISTER
SPEAKERS
LINK
REMOTES
REGISTER
MULTIPACKS
REGISTER LINK
To Next Page
Loading...
