32
1. Overview 2. Initial Set-up 3. DaiIy Operation
4. Additional
Information
5. Maintenance &
Troubleshooting
6. Safety &
Specifications
GROUP SPEAKER REGISTRATION CONT’D
5. Wait for the yellow registration
LED on the new group speaker
to change to a steady yellow. A
new speaker ID number will be
shown on the seven segment
display.
6. The registration has failed if
either of the registration LEDs
do not change to a steady
yellow and instead start to flash
rapidly.
7. If the registration fails repeat the
steps 2 through 5.
VOL
ON
REG
LINK
REGISTER
STATION
#
OFF
POWER
To Next Page
Loading...
