Lightspeed flexcat - Page 43

43
1. Overview 2. Initial Set-up 3. DaiIy Operation
4. Additional
Information
5. Maintenance &
Troubleshooting
6. Safety &
Specifications
BASE STATION
DC Power Input: 16V / 2.0A
Cradle Charging: 1-4 group speakers; 1-2 teacher
belt-packs; 1-2 handheld remotes
DC Charge out: 16V / 0.3A for 1-2 additional
group speakers
Audio Inputs: 3.5mm stereo x2
Wireless communication: DECT 1.9 GHz wideband for
audio connections; RF4CE for
control signals
Power switch with LED Indicator
Audio Link indicators: 6 LED for link to group speakers
1-6; 2 LED for link to teacher belt-
packs 1-2
Device Registration: push button for
speaker(s), belt-pack(s), and remote(s)
2.06/2.54; 3.2/3.7 MHz
Dimensions (L x W x H): 15.75” x 12” x 9.2”
GROUP SPEAKERS (1-6)
Battery Power: 12V NiMH battery pack
Audio output power: 5 Watts per speaker
Integrated Speaker: 2” balanced mode radiator (BMR)
Integrated Microphone: omni-directional electret
Wireless communication: DECT 1.9 GHz wideband
Cradle charging: 2 contacts for cradle charging
DC charging input: 16V / 0.3A for alternate charging
cable
Audio output: 3.5mm and USB
Registration: push button and LED for registra-
tion with base station
Dimensions (L x W x H): 8.5” x 5.0” x 3.5”
TEACHER BELT-PACK (1-2):
Battery Power: 2.5V NiMH battery pack
Cradle charging: 2 contacts for cradle charging
Wireless communication: DECT 1.9 GHz wideband
Headset Input: 2.5mm TRS
Audio Input: 3.5mm stereo
Power: on/off switch
Registration: push button and LED for registra-
tion with base station
Dimensions (L x W x H): 2.75” x 2.0” x 1.0”
SYSTEM SPECIFICATIONS