Lightspeed Flexmike - SECTION 2: SET-UP & USE; DETERMINE SET-UP LOCATION

11
1. Overview
2. Set Up & Use /
Daily Operation
3. Optional Accessories
4. Maintenance &
Troubleshooting
5. Warranty, Safety
& Specifications
SECTION 2:
SET-UP & USE
1. DETERMINE SET-UP LOCATION
The Multimike is generally located near the amplifier. This minimizes the length of cable
runs, reducing cost and labor and minimizing the possibility of unwanted EMI noise in the
system. If cable runs longer than 12 feet are required, we recommend using the balanced
audio output with balanced audio cable.
NOTE: Do not install the Multimike inside a fully enclosed metal cabinet or box. This will
shield the box, cutting o all wireless transmission to and from the unit.
AUDIO INMICROPHONE
TONE
POWER
MIN
1
MAX MIN MAX TREBL
E BASS
2