Lightspeed Flexmike - SECTION 1: OVERVIEW; SYSTEM COMPONENTS AND UNPACKING

4
1. Overview
2. Set Up & Use /
Daily Operation
3. Optional Accessories
4. Maintenance &
Troubleshooting
5. Warranty, Safety
& Specifications
SECTION 1:
OVERVIEW
SYSTEM COMPONENTS AND UNPACKING
The standard configuration of the Multimike will contain:
Flexmike Cradle
Charger & Power
Supply
Flexmike
Classroom
Microphone
1 2
AUDIO INMICROPHONE TONE
POWER
MIN
1
MAX MIN MAX TREBLE BASS
2
Multimike and USB Power Supply
PLEASE NOTE: The Multimike and any wireless components (microphones, Media
Connector) are registered together at the factory and are labeled as such with ID numbers.
Please keep all components together as a system. Moving them from one system to another
will result in the need to re-register them to function.
Additional system labels are attached to the Quick Start Guide should you add components,
or if one of your original components should need to be replaced.
Sharemike
Handheld
Microphone
Choice of Flexmike and/or Sharemike Microphone
Sharemike Charging
Adaptor and Power Supply