Lightspeed Flexmike - SHAREMIKE CONTROLS & CONNECTIONS; SHAREMIKE CONTROLS AND CONNECTIONS

To Next Page

To Previous Page

1. Overview

2. Set Up & Use /

Daily Operation

3. Optional Accessories

4. Maintenance &

Troubleshooting

5. Warranty, Safety

& Specifications

1. POWER BUTTON

2. MIC 1 LIGHT: This light indicates operation status for Sharemike

• Blue: solid = normal operation; blinking - link in process

• Red: solid = muted

3. MIC 2 LIGHT: This light indicates battery/charging status for Sharemike

• Red: flashing = low battery

• Red: solid = charging

• Green: solid = charging complete

4. AUDIO INPUT: Plug a laptop, MP3 player or other audio device into this jack to

wirelessly transmit the audio signal to be played through the system.

5. REGISTRATION BUTTON: Located in the battery compartment, only used when

adding or replacing Sharemike.

6. CHARGER INPUT: Plug the charging cable from the Sharemike charger into this jack.

7. SYSTEM ID LABEL

SHAREMIKE: CONTROLS & CONNECTIONS

Other manuals for Lightspeed Flexmike