EasyManua.ls Logo

Lightspeed Flexmike - Page 23

Lightspeed Flexmike
36 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
23
2. Set Up & Use /
Daily Operation
3. Optional Accessories
1. Overview
4. Maintenance &
Troubleshooting
5. Warranty, Safety
& Specifications
1 4
322
1
AUDIO INAUDIO OUT
REGISTER
USB POWER
5V/1.5A
TONE
TREBLE BASS
MEDIA CONNECTOR CONTROLS
AND CONNECTIONS CONT’D
1. TONE CONTROL: Adjusts the audio
tone, adding more bass or treble for a
more rich or crisp sounds.
2. USB POWER INPUT: Plug the micro
USB end of the power cable into this
USB port.
3. REGISTRATION PUSHBUTTON &
LIGHT: Pushing the registration
button in conjunction with the
registration button on the Multimike
will cause the two units to synchronize
as an operating system. The
registration light stops blinking
and the link light is solid when a
link is established. This is only used
when adding or replacing a Media
Connector.
4. TWO AUDIO OUTPUTS: 3.5mm stereo
jacks send audio signal to external
equipment such as a recorder or an
assistive listening device.
5. FOUR AUDIO INPUTS: Connect
standard audio devices to any of the
3.5mm stereo inputs. A provided cable
allows connectivity to RCA stereo
outputs common on DVD players and
televisions.
3
2
4
1
2
5
2
USB1 power adaptor and cable

Other manuals for Lightspeed Flexmike

Related product manuals