Need help?Do you have a question about the Lightware MX4x4DVI and is the answer not in the manual?
General| Category | Matrix Switcher |
|---|---|
| Model | MX4x4DVI |
| Input Ports | 4 |
| Output Ports | 4 |
| Video Signal | DVI |
| Max Resolution | 1920x1200 |
| EDID Management | Yes |
| Control Interface | RS-232, Ethernet |
| Power Supply | 100-240V AC |
Enables or disables front panel operation to prevent accidental changes.
Locks or unlocks destinations to prevent accidental switching.
Explains the two distinct switching modes available for connections.
How to enable or disable front panel operations using the Control Lock button.
Step-by-step guide for creating connections using TAKE mode.
Procedure for disconnecting outputs from sources in TAKE mode.
Step-by-step guide for creating connections using AUTOTAKE mode.
Procedure for disconnecting outputs from sources in AUTOTAKE mode.
How to save the current configuration as a preset in TAKE mode.
How to load a previously saved preset in TAKE mode.
How to save the current configuration as a preset in AUTOTAKE mode.
How to load a previously saved preset in AUTOTAKE mode.
Procedure to lock an output destination in TAKE mode.
Procedure to unlock a previously locked output destination.
Procedure to lock an output destination in AUTOTAKE mode.
Procedure to unlock a previously locked output destination.
Step-by-step guide for installing the control software on a PC.
Step-by-step guide for upgrading firmware using front panel buttons.
To Next Page
