EasyManua.ls Logo

Lightware MX32x32HDMI-Pro - User Manual

Lightware MX32x32HDMI-Pro
108 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
MX32x32HDMI-Pro
MX16x16HDMI-Pro
MX8x8HDMI-Pro
MX32x32DVI-HDCP-Pro
MX16x16DVI-HDCP-Pro
MX8x8DVI-HDCP-Pro
User's Manual

Table of Contents

Questions and Answers

  • K
    Katrina JohnsonAug 14, 2025
    How to fix no picture on Lightware Network Router video output?
    • K
      Kelly KeyAug 14, 2025
      If there is no picture on the video output of your Lightware Network Router, here are a few things to check: * Ensure all devices, including extenders, are properly powered. Try unplugging and reconnecting them. * Verify all video cables are securely connected. * Check if the output is muted and unmute it. * Confirm that the display can receive the video format by checking the emulated EDID and trying another one. For example, emulate the display’s EDID on the input port. * Ensure HDCP is enabled on the input port.
  • K
    Kathy AndersonAug 18, 2025
    What to do if no LAN connection can be established on Lightware Network Router?
    • M
      Michael HenryAug 18, 2025
      If you can't establish a LAN connection with your Lightware Network Router: * If a fixed IP address is set, try using a dynamic IP address by enabling the DHCP option. * Restore the factory default settings (with a fixed IP). * Check for IP address conflicts with other devices on the network.
  • C
    Christina GrahamAug 21, 2025
    Why is there no audio on the output of my Lightware Network Router?
    • P
      plewisAug 21, 2025
      If you are experiencing a lack of audio output from your Lightware Network Router, check the output port properties to ensure the output port is not muted.
  • T
    Travis KimAug 25, 2025
    How to restore audio to HDMI output signal on Lightware Network Router?
    • N
      norma77Aug 26, 2025
      If the HDMI output signal of your Lightware Network Router contains no audio: * Verify that the HDMI mode is selected and not set to DVI in the output port properties; set it to HDMI or Auto. * Check the EDID settings and select an HDMI EDID to emulate if a DVI EDID is currently being emulated.
  • J
    Jennifer HessAug 28, 2025
    What to do if I cannot connect to Lightware Network Router via RS-232 / RS-422?
    • S
      Stephen RichardsonAug 28, 2025
      If you cannot connect to the Lightware Network Router via RS-232 / RS-422, check the port settings of the connected computer and ensure they match the default settings of the matrix.
  • M
    Mr. Dale HansenAug 31, 2025
    How to troubleshoot no picture on Lightware Amplifier video output?
    • J
      Joe JordanAug 31, 2025
      If there is no picture on the video output of your Lightware Amplifier, there might be several reasons. First, ensure all devices and extenders are properly powered by checking their power connections. Unplugging and reconnecting them can help. Second, verify all video cable connections are secure and fit well. If the output is muted, check the mute state of the output ports. Also, the display might not support the current video format, so check the emulated EDID and try emulating the display’s EDID on the input port. Finally, ensure that HDCP is enabled on the input port.
  • J
    Janet Hicks DDSSep 3, 2025
    What to do if no LAN connection can be established with Lightware Amplifier?
    • L
      Lori RomanSep 3, 2025
      If you can't establish a LAN connection with your Lightware Amplifier, the issue might be due to an incorrect IP address setting. If you're using a fixed IP, try enabling the DHCP option to use a dynamic IP address. Alternatively, restore the amplifier to its factory default settings with a fixed IP.
  • N
    nataliebishopSep 7, 2025
    Why is there no audio on Lightware Amplifier HDMI output?
    • T
      Tammy MooreSep 7, 2025
      If there is no audio on the HDMI output of your Lightware Amplifier, first check the output port properties to ensure the output port is not muted and that the HDMI mode is correctly set. If the signal contains no audio, set the port to HDMI or Auto instead of DVI. If a DVI EDID is emulated, check the EDID settings and select an HDMI EDID to emulate.
  • C
    Cynthia SanchezSep 10, 2025
    How to fix Lightware Amplifier RS-232 connection issues?
    • V
      Vickie CookeSep 12, 2025
      If you cannot connect to the Lightware Amplifier matrix via RS-232, the RS-232 settings might be mismatched. Check the port settings on your connected computer to ensure they match the amplifier's settings. You can also try setting the matrix to its default settings.

Lightware MX32x32HDMI-Pro Specifications

General IconGeneral
BrandLightware
ModelMX32x32HDMI-Pro
CategoryMatrix Switcher
LanguageEnglish

Related product manuals