Need help?Do you have a question about the Lightware MX9x9DVI-Plus and is the answer not in the manual?
General| Matrix Size | 9x9 |
|---|---|
| Input Connections | 9 |
| Output Connections | 9 |
| Control Interface | RS-232, Ethernet |
| Audio Support | Yes |
| Input Connectors | DVI-I |
| Output Connectors | DVI-I |
| EDID Management | Yes |
| HDCP Support | Yes |
| Humidity | 10% to 90% non-condensing |
| Dimensions | 1U, 19-inch rack mount |
| Color Depth | 24-bit |
| Power Supply | 100-240V AC |
| Operating Temperature | 0°C to +40°C (+32°F to +104°F) |
| Storage Temperature | -20°C to 70°C |
| Resolution Support | Up to 1920x1200 |
Covers the device's advanced features for managing EDID data.
Explains how to create connections and disconnect/mute outputs.
How to save, load, and rename presets on the device.
Describes how to lock and unlock outputs to prevent accidental changes.
Explains how to control the device remotely via various interfaces.
Details operations controllable via the device's front panel buttons.
Detailed steps for installing the Lightware Device Controller software on Windows.
Detailed steps for installing the Lightware Device Controller software on Mac OS X.
Guide on how to upgrade the Lightware Device Controller software.
Steps to connect the device to the computer using LDC.
Access to EDID management via the web interface.
Detailed commands for switching, muting, locking, and managing presets.
Commands to set protocols, view error lists, and clear errors.
Commands to download and upload EDID content to/from the router.
Steps to install the Lightware Bootloader software.
Step-by-step instructions for upgrading the firmware.
Steps for closing connections, confirming successful upgrade, and restarting the device.
Detailed instructions for installing and starting the Bootloader.
Verifies that only one connection is active simultaneously.
Common firmware upgrade failure messages and their solutions.
Troubleshooting steps for serial port connectivity issues.
Steps to resolve issues with network (TCP/IP) connections.
Troubleshooting steps when the Bootloader cannot find the matrix.
To Next Page
