Lightware MX9x9DVI-Plus - Router Status Commands; View Product Type; View Serial Number; View Firmware Version of the CPU

Page 62 / 89 Section 8. Programmers reference
8.6. Router Status commands
8.6.1. View product type
Description: The router responds its name.
Format
Example(MX16x16DVI-Plus)
Command
{I}
→
{i}
Response
(<PRODUCT_TYPE>)CrLf
←
(MX16x16DVI-Plus)CrLf
Legend:
<PRODUCT_TYPE>
inputs
outputs
interface
MX16x16DVI-Plus
16
16
single link
MX12x12DVI-Plus
12
12
single link
MX9x9DVI-Plus
9
9
single link
Explanation: The connected device is an MX16x16DVI-Plus.
8.6.2. View serial number
Description: The router responds its 8-digit serial number.
Format
Example
Command
{S}
→
{s}
Response
(<SERIAL_NUMBER>)CrLf
←
(SN:10170142)CrLf
Info: Only the last 4 numbers are written onto the back of the router
8.6.3. View Firmware version of the CPU
Description: View the CPU firmware revision. To view other controller’s firmware version
see {FC} command (section 8.6.6 on page 63).
Format
Example
Command
{F}
→
{f}
Response
(<FW_VERSION>)CrLf
←
(FW:2.4.8)CrLf
Legend: <FW_VERSION> is the firmware version.
8.6.4. View CPU firmware compile time
Description: Shows the CPU firmware compile time.
Format
Example
Command
{CT}
→
{ct}
Response
(Compiled:<DATE>●<TIME>●
Build:<tag>)CrLf
←
(Compiled: Aug 29 2012 17:39:36,
build: 1624)CrLf
Legend: <DATE> Month, Day and Year
<TIME> Hours, minutes and seconds
<tag> Identification number of the firmware
Explanation: The firmware was made in 29.08.2012, 17:39:36 and the identification
number of the firmware is 1624.