Need help?Do you have a question about the Lightware MMX8x4-HT400MC and is the answer not in the manual?
General| Category | Matrix Switcher |
|---|---|
| Model | MMX8x4-HT400MC |
| Input Ports | 8 |
| Output Ports | 4 |
| Video bandwidth | 18 Gbps |
| 3D Support | Yes |
| Ethernet | Yes |
| RS-232 | Yes |
| EDID Management | Yes |
| Power Supply | 100-240 VAC, 50/60 Hz |
| Supported Video Formats | HDMI, DisplayPort |
| HDCP | 2.2 |
| Audio Formats | Dolby Digital, DTS |
| Control Interface | RS-232 |
| Rack Mount | Yes (1U) |
| Weight | 3.5 kg |
Details the key features of the MMX8x4-HT series, including 4K support, audio capabilities, EDID management, and security.
Explains how the Event Manager allows the device to react to changes based on pre-defined settings.
Provides instructions for installing and upgrading the Lightware Device Controller (LDC) software.
Details how to view and switch crosspoint connections using the LDC software.
Describes how to view and configure properties for TPS and HDMI input/output ports.
Provides an overview of input and output audio settings, including mixer controls.
Describes how to back up and restore device configurations to save and clone settings.
Lists general LW2 commands for querying device information and status.
Details LW2 commands for switching inputs to outputs and managing crosspoint states.
Lists LW3 commands for querying device information such as product name, serial number, and firmware version.
Details LW3 commands for controlling video crosspoint state, switching, and port settings.
Describes LW3 commands for querying and setting Emulated EDID for input ports.
Provides LW3 commands for detailed configuration of microphone and analog audio inputs/outputs.
Explains LW3 commands for setting conditions, actions, delays, and managing events.
Explains how to start the Lightware Device Updater (LDU2) software and select firmware packages.
Provides a step-by-step guide for performing the firmware upgrade process.
To Next Page
