Page 50 / 89 Section 6. Web control – Using built-in website
6.5. Terminal
This general-purpose web terminal is intended mainly for test and debugs purposes. After
a successful connection is established with a router this terminal can be used. All
commands can be used here which can be found in chapter 8 on page 52. The text can be
typed directly into the textbox.
Figure 6-8. Web terminal window
Commands are automatically surrounded by framing brackets (default setting). Every sent
command and every received response gets an arrow (-> or <-) prefix, and has different
font colors in order to help distinguishing.
If the “Command framing” checkbox is unchecked, you can send multiple commands
together, however in this case you have to type in the framing brackets manually.
If the Autoscroll checkbox is unchecked user should use the scroll bar to see the last
commands.
6.6. Support
For technical support, please don’t hesitate to contact Lightware Visual Engineering at
support@lightware.eu
To Next Page
Loading...
Need help?
General
