Ligno-VersaTec, a Multi-Function Meter: Pin - Pinless - RH
The Ligno-VersaTec comes with 220 built-in corrections for measuring dif-
ferent wood species, bamboo, panel products and sheetrock. Also built-in are
reference scales (pg 6) for measuring concrete and other building materials.
The Ligno-VersaTec with RH BluePeg probe and adapter RH can measure
relative humidity, temperature, dew point and GPP. Accessories are
available for in-situ RH moisture testing of concrete slabs and wall cavities.
3
RH
PIN
SCAN
1.
Use as Pinless Meter:
You can use the Ligno-Versatec
meter by itself as a dual-depth pinless meter with select-
able measuring depth 3/4” and 1/4”. The pinless mode of
the Ligno-VersaTec has the same features as the Ligno-
Scanner SDM.
2.
Use as Thermo-Hygrometer:
Add fast-responding, preci-
sion RH BluePeg probe. The connection between meter
and probe can be made by the adapter RH or an extension
cable. Ligno-VersaTec indicates ambient relative humid-
ity and temperature, GPP and dew point.
3.
Use for in-situ RH Testing in Concrete:
Add RH cable,
sleeves and the removable RH probes for in-situ RH
testing. The Lignomat system complies to ASTM F2170.
Pin or pinless mode can be used to take qualitative mois-
ture measurements in concrete. ASTM F2659. Page 21.
4.
Use as Pin Meter:
- Add slide hammer electrode E12. Teflon-coated pins
allow measuring up to 2” deep. Differences between
surface and core moisture can be detected with the E12.
- Add inspector electrode E14V. The E14V is a tool used
in construction and restoration to track moisture in
corners, behind moldings, under base boards and
other hard-to-reach places. The handle can be
elongated to reach high up or down low. Add EL pins 7”
long. E14V with EG pins 3/4” is also used to measure
hard materials (bamboo). Page 9.
The pin mode of the Ligno-VersaTec has the same fea-
tures as the Lignometer K.
E14V
E12
To Next Page
Loading...