Need help?Do you have a question about the Lincoln Electric BesterMig 200-S and is the answer not in the manual?
General| Output Current | 30-200A |
|---|---|
| Wire Feed Speed | 2-12 m/min |
| Wire Diameter | 0.6-1.0 mm |
| Protection Class | IP21S |
| Dimensions | 840 x 420 x 820 mm |
| Weight | 47 kg |
| Rated Input Current | 16A |
| Wire Feed Speed Range | 2-12 m/min |
| Input Power | 230V |
Covers essential safety guidelines and warnings related to operating welding equipment.
Details on suitable placement and environmental conditions for the welding machine.
Explains the concept of duty cycle and its relation to machine overheating and thermal protection.
Instructions for correctly connecting the welding machine to the power supply.
Information on connecting welding leads and other output interfaces.
Description of buttons, displays, and indicators on the welding machine's front panel.
Details about rear panel connections and additional control functions.
Instructions for adjusting the wire spool brake to prevent spontaneous unrolling.
Step-by-step guide for feeding electrode wire into the welding torch.
Adjusting pressure roll force, changing drive rolls, and connecting gas cylinder for welding.
Steps to prepare the machine for MIG/MAG and FCAW-SS welding.
Details on setting parameters for GMAW/FCAW-SS welding in manual mode.
Instructions for performing GTAW (TIG) welding with the machine.
Guide for performing SMAW (MMA) welding using the electrode holder.
Daily checks and cleaning tasks to ensure the machine's reliability.
Scheduled maintenance tasks to be performed every 200 hours or annually.
Information on Lincoln Electric's support policies and finding authorized service facilities.
To Next Page