OPTIONS / ACCESSORIES
POWER WAVE 300C DUAL GAS BOTTLE
UPGRADE KIT (K4866-1) -
Allows for the use of multiple gas bottles or a
combination of a gas bottle and water cooler on the
rear of a Power Wave® 300C.
POWER WAVE 300C WATER COOLER
ADAPTER KIT (K4898-1) -
Allows Cool Arc® 40 Water Cooler to be installed in
place of a gas bottle on the 300C single or dual bottle
rack.
COOL ARC® 40 WATER COOLER
(K1813-1) -
Water cooler with quick disconnects MIG guns and TIG
torches.
POWER WAVE® 300C 115V AUXILIARY KIT
(K2829-1) -
Adds a duplex 115v outlet to the rear of the machine.
Includes harness and PC board.
SCREEN PROTECTOR* ORDER KP4735-1
POWER WAVE 300C ACCESSORIES
®
C-1
MAGNUM® PRO WELDING GUNS -
See publications E12.05 and E12.08.
GUN CONNECTOR KIT - POWER
WAVE 300C® / Power MIG -
®
®
Configures Lincoln Electric Magnum PRO guns to
connect to Power Wave® 300C and Power MIG
power sources. For use with KP42 & KP44 series
liners. Order K466-6.
MAGNUM® PRO DUAL PROCEDURE
ADAPTER*
Required to use Magnum® PRO Dual Procedure or
Dual Schedule guns with the Power Wave® 300C.
Order K3159-1.
FAST-MATE™ ADAPTER*
Allows guns with a Fast-Mate™ style back end to
connect into Power Wave® 300C and Power MIG®
power sources. Order K489-8.
REMOTE OUTPUT CONTROL WITH 12-PIN
UNIVERSAL CONNECTOR*
Consists of a control box with choice of two cable
lengths. Permits remote adjustment of output. Order
K857-2 (25 ft 7.6 m) Order K857-3 (100 ft 30.5m)
ARC START SWITCH -
Attaches to TIG torch for convenient finger control.
Comes equipped with 12-pin connector. Order
K814-2.
HAND AMPTROL ROTARY TRACK STYLE,
12-PIN AMPHENOL -
(25 ft) Remote current control for TIG welding Order
K963-4.
FOOT AMPTROL™ -
Provides 25 ft. (7.6 m) of remote output control for
TIG welding. (12-pin plug connection). Order K870-2
PTA-17F -
Air Cooled TIG Ready-PAK® Flexible head and
Ultra-Flex™ cables provide ultimate comfort and
maneuverability. Pre-configured package with K1622-1
Twist-Mate™ adapter, cable cover. Includes: #7 nozzle,
1/16 in. (1.6 mm) and 3/32 in. (2.4 mm) collets, collet
bodies and E3® Tungsten Order: K1782-14
(12.5 ft 3.8 m) Order K1782-18 (25 ft, 7.6 m) Additional
TIG torch options in E12.150
SPINDLE ADAPTER FOR SMALL
SPOOLS*
Permits 8 in. (200 mm) O.D. spools to be mounted
on 2 in. (51 mm) O.D. spindles. Order K468.
SPINDLE ADAPTER FOR 14LB
COILS*
Permits 14 lb. (6 kg) Innershield® coils to be
mounted on 2 in (51mm) O.D. spindles. Order
K435.
To Next Page
Loading...
Need help?
General
