Lincoln Electric POWER WAVE S700 User Manual

Operator’s Manual
POWER WAVE
®
S700
Register your machine:
www.lincolnelectric.com/register
Authorized Service and Distributor Locator:
www.lincolnelectric.com/locator
IM10144 | Issue D ate Aug-13
© Lincoln Global, Inc. All Rights Reserved.
For use with machines having Code Numbers:
11957
Need Help? Call 1.888.935.3877
to talk to a Service Representative
Hours of Operation:
8:00 AM to 6:00 PM (ET) Mon. thru Fri.
After hours?
Use “Ask the Experts” at lincolnelectric.com
A Lincoln Service Representative will contact you
no later than the following business day.
For Service outside the USA:
Email: globalservice@lincolnelectric.com
Save for future reference
Date Purchased
Code: (ex: 10859)
Serial: (ex: U1060512345)

Lincoln Electric POWER WAVE S700 Specifications

General

Input Phase	3-Phase
Output Voltage Range	10-44 V
Rated Output	700 A
Process	MIG, TIG, Stick, Flux-Cored, Pulsed MIG
Wire Feed Speed	50-800 IPM
Duty Cycle	100% at 700A

Summary

Section A: Warnings

Installation and Setup

Technical Specifications

Detailed specifications for the Power Wave® S700, including input voltage and current ratings.

Installation Safety Precautions

Essential safety guidelines to follow before and during equipment installation.

Input Connection and Voltage Selection

Procedure for connecting input power and selecting the correct input voltage.

Operation and Controls

Operation Safety Precautions

Critical safety procedures to follow before operating the welding machine.

Basic Welding Controls

Maintenance and Servicing

Maintenance Safety Precautions

Essential safety guidelines for performing maintenance tasks on the welding equipment.

Troubleshooting Guide

How to Use Troubleshooting Guide

Using Status LED for Diagnostics

Interpreting status light conditions to identify system errors and malfunctions.

Error Code Interpretation

List and explanation of error codes output by the machine's status light.

Basic Machine Troubleshooting