Need help?Do you have a question about the Lincoln Electric SPIRIT II 275 and is the answer not in the manual?
General| Brand | Lincoln Electric |
|---|---|
| Model | SPIRIT II 275 |
| Category | Welding System |
| Language | English |
Lists components for the Spirit II 275 plasma cutter: Gas Control box, Power Supply, and Power ON Indicator.
Lists components for the Spirit II 400 plasma cutter: Gas Control box, Power Supply, indicator, and Cooling Tower.
Guide on powering the machine, verifying emergency stops, and initiating the DATUM sequence.
Explains setting the machine's zero point by pressing DATUM after powering on the system.
Details using on-screen arrows to control torch body movement for continuous motion.
Describes moving the torch body by specified increments using arrows and a slider.
Establishes the program's starting point, typically the Lower Left corner of the material.
Returns the torch body to the established PROGRAM ZERO position safely.
Explains settings like material, thickness, preflow, plasma gas, current, and shield gas.
Displays consumable parts of the Spirit II torch with part numbers for selected material/thickness.
Details status lights for DC Power, 3 Phase Power, Gas Console, ASC Door, Coolant, and Flow.
Guides through selecting, setting, and running the first non-bevel test cut for verification.
Guides through selecting, setting, and running the first bevel test cut for verification.
To Next Page
