LINCOLN GmbH * Postfach 1263 * D-69183 Walldorf * Tel +49 (6227) 33-0 * Fax +49 (6227) 33-259 * Tx 466088
Owner Manual
High-Pressure Multiline Pump Model 105
2.1A-18002-A95
Subject to change without notice
Page 2 from 18
Preface / Table of Contents
Preface to the Owners Manual
This User Manual is intended to familiarize the user with the
pump/lubrication system and to enable him to use its various
features.
The Operating Instructions contain important information for
safe, correct and economic operation of the pump/lubrication
system. Their observance will help avoid hazards, reduce re-
pair costs and downtime, increase the reliability and prolong
the service life of the pump/lubrication system.
These Operating Instructions must be completed to include
the respective national regulations concerning the prevention
of accidents and protection of the environment.
The User Manual must always be available on the site where
the pump/lubrication system is in operation.
If persons who are charged with work with the pump/lubricati-
on system do not have a good command of the english lan-
guage, it is the user’s responsibility to take the necessary ac-
tion to make the User Manual, particularly the Operating In-
structions, understandable to these persons.
The User Manual must be read and used by all persons who
are charged with work with the pump/lubrication system, e.g.
• Operation, including adjustment, troubleshooting during
operation, elimination of production waste, maintenance,
disposal of process materials
• Maintenance (inspection, repairs)
• Transport
Table of Contents
Contents Page
1 Safety Instructions ......................................... 3
2 Description ....................................................... 5
2.1 General .............................................................. 5
2.2 Appropriate Use ................................................ 5
2.3 Technical Data .................................................. 5
2.4 Structure ............................................................ 6
2.5 Electrical Equipment ......................................... 8
2.6 Mode of Operation ............................................ 8
3 Erection and Assembly.................................. 9
3.1 Erection of the Pump ........................................ 9
3.2 Electrical Connection ........................................ 9
Contents Page
4 Operating Instructions ................................... 9
4.1 Commissioning.................................................. 9
4.2 Maintenance .................................................... 10
4.3 Troubleshooting .............................................. 11
5 Spare Parts List ............................................. 12
6 Accessories ................................................... 15
6.1 Dimensional Drawings .................................... 15
6.2 Lubricant Output Diagram .............................. 16
6.3 Motor data sheet ............................................. 18
6 Declaration ..................................................... 18
To Next Page
Loading...
