Tools required for
maintenance, repair
and adjustment
•
7
/16 in. open end wrench
• 1
1
/2 in. open end wrench
•
3
/4 in. open end wrench
• 12 in. adjustable wrench
•
1
/8 in. allen wrench
•
5
/32 in. allen wrench
•
1
/4 in. allen wrench
•
5
/16 in. allen wrench
•
3
/8 in. allen wrench
•
1
/4 in. drive socket
•
1
/4 in. socket
•
5
/16 in. socket
• Flat blade screwdriver 0.10” wide and
0.025” thick
• Pick to remove seals and spiral retaining
rings
• Small snap ring pliers
• Special tool kit 276275
• Phillips Screwdriver
•
1
/2 in. Allen Wrench
• Hammer
• Torque wrench (ft./lbf and in./lbf)
• Hex allen socket adapters (required to
torque allen screws)
• Loctite 242 medium strength thread lock
or equivalent.
• Loctite 222 medium strength thread lock
or equivalent.
Maintenance and
repair
Relieve pressure from the pump and supply
lines before servicing or repairing the pump,
to reduce the risk of an injury from injection,
splashing fluid or moving parts.
Always use Lincoln Industrial parts for
service and repair.
WARNING
9
To order call 1-800-548-1191 or visit www.partdeal.com - info@partdeal.com
To Next Page
Loading...
Need help?
General
