Line 6 HX Stomp User Manual

10
Play View
HX Stomp has two main views—Play view and Edit view. Play view is typically used
when performing or jamming.
1. Press VIEW to select Play view.
The current preset number and name appear on the upper half of the display and
the current footswitch mode's assignments appear on the lower half:
16B
Pastor of Muppets
Harmony
Delay
TAP/
TUNER
Dynamix
Flanger
1
2. Press PAGE or PAGE to select one of four footswitch modes
(see below).
Selecting a Preset
HX Stomp stores 42 banks of three presets (A, B, and C) for a total of 126 presets.
1. If not already there, press VIEW to select Play view.
2. Press PAGE or PAGE to select Preset Mode (see below).
3. Press FS1+FS2 (or FS2+FS3) to choose the desired bank.
Thebank'spresetsash,indicatingtheyarereadytoload:
17A Not Adorable
17B Crystal Lettuce
17C Marketing Bullet
17B
17A
17C
4. Press one of the footswitches to load its preset.
Alternatively, turn the Upper Knob to select a preset.
Harmony
Delay
TAP/
TUNER
Dynamix
Flanger
PRESETPRESET TAP/
TUNER
16B
16A
16C
3
2
1
Step on FS1/FS2 to turn any
assigned block(s) on and off.
Touch FS1 or FS2 repeatedly to
view additional assignments, if
any.
Step on FS3 to set the tempo.
Hold FS3 to open the tuner.
Touch FS3 to open the tempo
panel.
Step on FS1 to select the pre-
vious preset.
Step on FS2 to select the next
preset.
Hold FS1+FS2 to toggle be-
tween Preset Up/Down and
Snapshot Up/Down
Step on FS3 to set the tempo.
Hold FS3 to open the tuner.
Touch FS3 to open the tempo
panel.
Step on a footswitch to select
a preset (A, B, or C).
Step on FS1+FS2 to queue the
previous bank of presets.
Step on FS2+FS3 to queue the
next bank of presets.
Step on a footswitch to select
Snapshot 1, 2, or 3.
Step on FS1+FS2 to queue the
previous bank of presets.
Step on FS2+FS3 to queue the
next bank of presets.
See "Snapshots" for more information.
Snapshot ModePreset ModeScroll ModeStomp Mode

Line 6 HX Stomp Specifications

General

DC-in jack	Yes
USB 2.0 ports quantity	1
Connectivity technology	Wired
6.35 mm (1⁄4-inch) input	2
Display type	LCD
Power source type	DC
Product color	Black