Need help?Do you have a question about the Line 6 POWERCAB 112 and is the answer not in the manual?
General| Frequency Response | 70Hz - 20kHz |
|---|---|
| Impedance | 8 ohms |
| Weight | 17.2 kg |
| Speaker Size | 12 inches |
| Type | Powered FRFR (Full Range Flat Response) Speaker |
Details the volume control and signal presence/clipping indicator LED.
Explains navigation buttons, the display screen, and the select/edit knob functionality.
Describes saving presets and the LED ring for preset identification.
Details the main power switch and AC power cable connection.
Explains low cut filter, analog XLR output, and combo input jacks for amp modelers.
Covers USB, MIDI, and L6 LINK/AES digital audio and control connections.
Details the power switch, AC input, volume control, and signal status LED.
Explains speaker mode selection via button/LED and the low cut filter switch.
Describes ground lift, analog XLR output, and the combo input jack for amp modelers.
Full-range, flat-response mode for direct signal playback or use with amp modelers.
Emulates various guitar speaker tones for a traditional 'amp-in-the-room' experience.
Allows use of third-party cabinet simulation IRs for custom cabinet sounds.
Allows storing and recalling speaker tone, mode, color, and parameter settings.
Details controls for Mode, Voicing, Speaker Model, DI Mic Model, and Mic Distance.
Supports importing 128 IR files for expanded speaker cabinet modeling options.
Accepts mono/stereo .wav files, automatically conforming to required properties.
Free editor for Mac/PC to manage presets and load user IRs.
Connect via USB to customize presets and manage IR files.
Functions as a low-latency, stereo USB 2.0 audio interface for Mac/PC/Mobile.
Offers 'Normal' (unprocessed) and 'Processed' modes for audio playback.
Recommended driver for low-latency audio performance in Windows DAW applications.
Adjusts input gain, input type (Normal/Monitor), and links input gain levels.
Configures MIDI channel, MIDI thru, MIDI PC receive/send, and USB audio mode.
Sets automatic dimming for the LCD and illuminated knob after inactivity.
Provides digital audio and remote control between Line 6 Helix and Powercab devices.
Accepts AES/EBU signals for digital audio, splitting stereo to two units.
Connects modeler's mono output to unit's input; sends direct signal to PA/mixer.
Connects modeler's analog/digital output; optional monitor feed from mixer.
Connects left/right analog outputs from modeler to two Powercab devices.
Responds to MIDI Program Change messages to recall presets 000-127.
Maps MIDI CC messages to global parameters like volume, input type, and USB mode.
Maps MIDI CC messages for preset editing like mode, voicing, mic selection, and level.
To Next Page