LineEye LE Series - Chapter 1 Before Using the Product; 1.1 Guide to This Manual

9
System Setting and Version
Press [MENU] and then touch "System Settings".
Shortcut key
［
MENU
］
,[D]
Touch the tab or press
、
[SHIFT]+[ ] or [SHIFT]+[ ].
ڦ Display
It is able to adjust the brightness of LCD
back light, set the power saving mode,
and select the storage device of screen
shot.

Press [SHIFT]+[ESC] to save the screen
images.
ڦ Power
Set ON/OFF of Auto Power O
function and select the charging type of
Lithium ion battery.

Auto Power Off function does not work
during measurement.
ڦ Wireless LAN
To enable this function, touch
"Setting change" and select "Stations"
mode or "Access Point" mode.
(Factory setting of Wireless LAN is
O.)

Some models without this function do not have this setting.
ڦ Version
Serial number and rmware version are displayed.
▲
▲