LH40DA OWNER’S/OPERATOR’S MANUAL 18.0
12. MAINTENANCE
NOTE: All nuts that have a cotter pin installed must be serviced by
an authorized Dealer.
Front Wheel Hub Tightening
Front wheel bearing tightness and spindle nut retention are critical
component operations. Service work must be performed by an
authorized dealer.
Tapered nuts: install with tapered side against wheel.
Steering Inspection
The steering assembly of the machine should be checked periodically
for loose nuts and bolts. If loose nuts and bolts are found, have your
dealer tighten them before riding your vehicle.
Camber and Caster
The camber and caster are non-adjustable.
WARNING
Do not attempt to adjust the tie rod for toe alignment. Severe injury or
death can result from improper adjustment.
Contact your dealer. He/she has the training and tools to
Make these adjustment.
To Next Page
Loading...
