LH40DA OWNER’S/OPERATOR’S MANUAL 18.0
12. MAINTENANCE
Follow the safeguards listed below to prevent this type of situation.
Important Safeguards
Maintain proper tire pressure according to charts below. Improper tire
inflation may affect ATV maneuverability.
Do not use improper tires. The use of non-standard size or type tires
may affect ATV handling.
Make certain the wheels are installed properly. If wheels are improperly
installed it could affect vehicle handling and tire wear.
Wheel Removal Procedure
1. Stop the engine, place the transmission in gear and lock the parking
brake.
2. Loosen the wheel nuts slightly.
3. Elevate the side of the vehicle by placing a suitable stand under the
footrest frame.
4. Remove the wheel nuts and remove the wheel.
Wheel Installation
1. With the transmission in gear and the parking brake locked, place th
wheel in the correct position on the wheel hub. Be sure the valve stem
is toward the outside and totation arrows on the tire point toward
forward rotation.
2. Attach the wheel nuts and finger
tighten them.
3. Lower the vehicle to the ground.
4. Securely tighten the wheel nuts
To Next Page
Loading...
