19-3
Version 1.77 Copyright © 1997 Link Communications Inc. 8/7/97
046: Start Beacon
This command starts a beacon using the table you set up with command 045. You can start with
any of the beacon table slots, so different conditions can start different messages.
<046> SS
Parameters:
046 is the default command name.
SS = beaconing table slot number to start with (01..50)
047: Cancel Beacon
This command allows you cancel a beacon after it has been started. Since only one beacon can be
active at a time, you don't have to specify which one you want to cancel.
<047>
Parameters:
047 is the default command name.
To Next Page