2-12
Version 1.77 Copyright © 1997 Link Communications Inc. 8/7/97
013: Recall Radio Port Card Conditions
This command tells you what cards are either not installed on the controller, or have stopped
responding to the system.
<013>
Parameters:
- 013 is the default command name.
Voice Response:
C The controller will speak the ports that are not on the system
C If a port is on the system, its port number will not be spoken.
C If a port is off the system, or there has been a failure the card number will be
spoken. If a card is installed but this command says it is off of the system,
try resetting the controller with command 035 and check it again
To Next Page
Loading...