Link Communications RLC-3 - 003,004: Recall a Ports Connections

2-7
Version 1.77 Copyright © 1997 Link Communications Inc. 8/7/97
003,004: Recall a Port's Connections
This command allows you to find out where port X's receiver or transmitter is connected.
<003> x Interrogate a Receiver
<004> x Interrogate a Transmitter
Parameters:
- 003 is the default command name. This command finds what transmitters are connected
to receiver 'X' is routed to.
- X is the receiver to recall the connections to
- 004 is the default command name. This command finds what receivers are routed to
transmitter 'X'
- X is the transmitter to recall the connections to
Default:
- Port 1 defaults as a repeater
- Ports 2..8 default to links
Example 1:
Port 1 is connected to ports 2 4 6 8
<003> 1 D or unkey or <Enter>
Response:
Voice Response "1 Connect 2 4 6 8"
Example 2:
Ports 1,3,5,7 are connected to port 2
<004> 2 D or unkey or <Enter>
Response:
Voice response "2 Connect 1 3 5 7"