3-4
Version 1.77 Copyright © 1997 Link Communications Inc. 8/7/97
abuse.
If you do turn on the DTMF mute for the autopatch port, don't turn the cover tone on. If
you do and the patch hears an echo of the digits it is dialing, it will send the cover tone along with
the digits and prevent the number from being dialed correctly.
008: Check DTMF Mute/Cover Tone/Bypass Settings
This command allows you to recall what was last set with command 007. Command 007 can also
be used to recall the settings. The voice response is the same as command 007.
<008> p Recall mute controls on a selected port
To Next Page