26
Network | WAN Setting (NAT Mode)
Network > WAN Setting
WAN Connection Type: NAT mode.
WAN MTU: This value is “Maximum Transmission Unit”. The size of a single packet can only be as
large as MTU. If the size of the packet exceeds MTU, the packet would be fragmented.
DNS1/2: Domain Name Server, editable when users select “Static” in “Connection Mode”. Otherwise,
DNS information will be given by DHCP server. WAN IP Address/ Subnet Mask/ Gateway Address:
These values are un-editable.
Reset fields to the last saved values.
Apply button
Commit the changes made and save to the CPE device, some
services will be reloaded.
To Next Page
Loading...
