27
Network | LAN Setting
Network >LAN Setting
LAN Setting:
LAN IP Address / Subnet Mask: The IP address and subnet mask used by CPE in LAN
If users choose other tunnel mode, this IP means LAN side domain and Web GUI IP address.
(This IP will change IP prefix in “DHCP Server” , “Port Forwarding” and “Port Trigger”)
DHCP Server Settings: (Available in NAT, Tunnel, Router Mode)
Network>LAN Setting
CPE has a built-in DHCP server to manage the distribution of IP addresses. A device connected to CPE
To Next Page
Loading...
