Linksys AC1750 User Manual

4
Product Overview
Linksys EA-Series
Wall-mounting placement
The router has two wall-mount slots on its bottom panel. The distance between
the slots is 82 mm. Two screws are needed to mount the router.
Suggested Mounting Hardware
3-5 mm
7-8 mm 1.5-2 mm
NOTE
Linksys is not responsible for damages incurred by unsecured wall-
mounting hardware.
Follow these instructions:
1. Determine where you want to mount the router. Make sure that the wall
you use is smooth, flat, dry, and sturdy. Also make sure the location is
within reach of an electrical outlet.
2. Drill two holes into the wall. Make sure the holes are 82 mm apart.
3. Insert a screw into each hole and leave 3 mm of its head exposed.
4. Position the router so the wall-mount slots line up with the two screws.
5. Place the wall-mount slots over the screws and slide the router down
until the screws fit snugly into the wall-mount slots.
Wall-mounting template
Print this page at 100% size.
Cut along the dotted line, and place on the wall to drill precise spacing.
82 mm

Linksys AC1750 Specifications

General

Brand	Linksys
Model	AC1750
Max Data Rate	1750 Mbps
Ethernet Ports	4 x Gigabit LAN, 1 x Gigabit WAN
USB Ports	1 x USB 3.0, 1 x USB 2.0
Memory	128 MB Flash, 256 MB RAM
Wireless Standards	802.11a/b/g/n/ac
Bands	2.4 GHz, 5 GHz
Wireless Speed	450 Mbps (2.4 GHz), 1300 Mbps (5 GHz)
Frequency Band	2.4 GHz, 5 GHz
Antennas	3 external antennas
Processor	dual-core
Security	WPA2 Personal, WPA2 Enterprise, WPA, WEP
Wi-Fi Technology	Dual-Band
Weight	1.43 lbs